产品中心
 首页 > 产品中心
AD-2008B2充超高灵敏度充电式手持金属探测器

发布时间:2017/3/7 17:22:57    点击:5219次




.功能介绍

       AD-2008B2超高灵敏度充电式手持式金属探测器是目前国内手持类最高探测灵敏度的手持金属探测器,该产品的探测技术以接近于国际知名金属探测生产厂商如:美国盖瑞特、芬兰、启亚该产品全部采用优质元器件制作,具有探测精度高、操作单、外型轻颖美观,声音清脆响亮,等特点。具有开机与探测告警灯和光自转换功能,声音清脆响亮,特别适用于对探测灵敏度要求极高的公场所或工厂使用,学校考场、机场、公安、边防、法院、监狱、体育场馆、会展场馆、娱乐场所、车站码头等行业的安全检查;贵重金属制造加工企业如:首饰厂、电子厂、五金厂等企业的防窃检查。

  适用范围:

学校考场、机场、公安、边防、法院、监狱、看守所、体育场馆、会展场馆、娱乐场所、车站码头、机场、工业设施、文化胜地、军事设施、数据处理中心等行业的安全检;贵重金属制造加工企业如:首饰、电子、五金、汽车等企业的防偷窃检查

性能及特

二.  探测距离:

1. 大头针        3060mm

2. 六四式****    200mm

3. 六寸匕首      250mm

4. 直径20mm钢球 120mm

三.  特点:

1. 流线型外观,小巧精美,便于携带;使用简单、方便,无需调整;

2. 节能环保:250MA电池充电一次可连续工作45小时以上;当9V电池降至6V左右,探测距离不变;

3. 两种报警模式可选:LED灯光鸣声报警或振动报警;

4. 方便携带:检测探头面积大,探测速度快;

5. 灵敏度可能选择高、低二种;

6. 有外接充电插孔:安装充电电池后,可直接为本机完全充电;

7. 具有超强的抗震性,坚固耐用,一米高度自由落体无损伤;

四. 技术参数:

1.电源:9V标准电池                  2、功耗:最大270MW

3、工作频率:22KHZ                   4、待机电流:<5MA

5、工作电压:直流7~12V               6、工作温度:-10℃~65℃

7、复位时间: 0.5秒,自动

8、单机净重:175g(不含电池),包装后重量:242g(不含电池);

9、尺寸:295mm*68mm*28mm

·上一篇:AD-2EN6S高灵敏度金属探测门
·下一篇:安迪瑞AD-M80/AD-M100无线门禁
关闭本页】【返回页顶


版权所有 惠州市安全防范行业协会

惠州市安全防范行业协会 主办 备案号:粤ICP备16001904号

地址:惠州市江北云山东路4号(省电信大院5号楼)

办公电话:0752-2811992    邮箱:hzsia2015@163.com


协会介绍 入会指南 协会成员 联系我们
HTTP/1.1 200 OK Date: 31 ?? 2025 10:28:56 G5T Content-Length: 3073 Content-Type: text/html Connection: Close Server: Microsoft-IIS/10.0 Runtime Error

Server Error


Runtime Error

Description: A server error has occurred. The current custom error settings prevent the details of the error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.

Details: To enable the details of this specific error message to be viewable on remote machines, please define an errorDetails attribute within the "filter.config" configuration file. This errorDetails attribute should then have its value set to "On".


<!-- Filter.Config Configuration File -->

<configuration>
    <httpFilters errorDetail="On">
        <!-- managed filters configuration -->
    </httpFilters>
</configuration>

Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "errorPage" attribute of the <httpFilters> configuration tag to point to a custom error page location.


<!-- Filter.Config Configuration File -->

<configuration>
    <httpFilters errorDetail="LocalOnly" errorPage="mycustompage.htm">
        <!-- managed filters configuration -->
    </httpFilters>
</configuration>