产品中心
 首页 > 产品中心
AD-2008B1公检法专用手持式金属探测器

发布时间:2017/3/7 17:15:24    点击:4937次




    AD-2008B1手持金属探测是经过广东安盾多年的金属探测研发生产经验助力中国2008奥运火炬接力特制的一款手持式高低灵敏度可选金属探测器,所有配件全部采用优质元器件制作,探测精度高、操作简单、外型轻颖美观,声音清脆响亮,具有开机与探测告警灯和声光自动转换功能,特别适用于对探测灵敏度要求极高的公共场所或工厂使用。


围:                                        

学校考场、机场、公安、边防、法院、监狱、看守所、体育场馆、会展场馆、娱乐场所、车站码头、机场、工业设施、文化胜地、军事设施、数据处理中心等行业的安全检查;贵重金属制造加工企业如:首饰、电子、五金、汽车等企业的防偷窃检查。


性能及特点

 ○ 配备皮套,方便携带,其敏感表面的特别外观令操作简便易行,优于环形传感器式手探。

 ○具备充电功能,充电时间为4-6小时。

 ○当电压不够时,指示灯不亮或无报警声

 ○灵敏度高,能探测黑色金属和有色金属,使用简单、方便、调整容易。

 ○采用循环开关分别切换声响报警和隐蔽振动报警功能,可选择耳机

 ○碱性电池以10%-15%报警比例工作,可连续工作150小时以上。

 ○最小可探测到一根回针大小的物体。


技术参数:                                              最高灵敏度:

 ○形尺寸:长410mm x 85x 45mm             ○38式****: 25 cm

 ○作电源:标准9v叠层碱性电池                  ○小   刀:  18 cm

 ○警模式:声(震)光同步报警                      ○刀   片:  13 cm

包装说明:国际卡通箱包装

产品尺寸:41 x 8.5x 4.5(cm)

产品重量: 409g整箱包装尺寸:54.5x30x43.5(cm)

整箱重量:毛重:16KG,净重:12.5KG

·上一篇:AD-2012BY手持式危险品液体检测仪
·下一篇:易燃易爆危险品液体检测仪AD-1800
关闭本页】【返回页顶


版权所有 惠州市安全防范行业协会

惠州市安全防范行业协会 主办 备案号:粤ICP备16001904号

地址:惠州市江北云山东路4号(省电信大院5号楼)

办公电话:0752-2811992    邮箱:hzsia2015@163.com


协会介绍 入会指南 协会成员 联系我们
HTTP/1.1 200 OK Date: 1 ?? 2025 06:40:10 G6T Content-Length: 3073 Content-Type: text/html Connection: Close Server: Microsoft-IIS/10.0 Runtime Error

Server Error


Runtime Error

Description: A server error has occurred. The current custom error settings prevent the details of the error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.

Details: To enable the details of this specific error message to be viewable on remote machines, please define an errorDetails attribute within the "filter.config" configuration file. This errorDetails attribute should then have its value set to "On".


<!-- Filter.Config Configuration File -->

<configuration>
    <httpFilters errorDetail="On">
        <!-- managed filters configuration -->
    </httpFilters>
</configuration>

Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "errorPage" attribute of the <httpFilters> configuration tag to point to a custom error page location.


<!-- Filter.Config Configuration File -->

<configuration>
    <httpFilters errorDetail="LocalOnly" errorPage="mycustompage.htm">
        <!-- managed filters configuration -->
    </httpFilters>
</configuration>