产品中心
 首页 > 产品中心
AD-2015B1便携式痕量爆炸物毒品检测仪

发布时间:2017/3/7 17:07:40    点击:5081次




产品简介:

    广东安盾便携式爆炸物毒品探测仪是我公司开发的新一代便携式光电离爆炸物和毒品检测仪,该产品采用先进的光电离高分辨离子迁移谱技术,不含放射源,对人体无任何辐射危害。具有检测速度快、检测灵敏度高、功耗低、体积小、质量轻、便于携带、易于维护、使用环境和要求适应性强等特点,能同时准确检测出黑火药以及国际民航组织规定的全部爆炸物和毒品。 

五大优势:
1、全球首创的不含放射性源真空紫外光电离源,使用安全、方便,能同时准确分析出爆炸物和毒品成分。
2、全球独有的黑火药纳克级检测性能,能检测包括烟花爆竹、民用土制炸药等危险物品。
3、检测分析速度比同类产品更快,2秒内出结果。
4、采用正、负双模式,可同时检测爆炸物和毒品。
5、开放式数据库,样品库信息可随时升级。

技术指标:
采用技术:光电离高分辨离子迁移谱
可检爆炸物:各种军用、民用和土制炸药等;如黑火药(Black Powder)、硝酸铵(AN)、梯恩梯(TNT)、太安(PETN)、黑索金(RDX)、硝化甘油、奥克托今、特屈儿、二硝基甲苯(DNT)、C4、Semtex等。可检毒品:盐酸******、盐酸******、四氢****酚、甲基苯丙胺(****)、盐酸******(***)、盐酸吗啡;并可根据需要添加新样本;
采样方式 痕量颗粒吸附和试纸擦拭取样。
灵敏度:纳克级
报警方式:声讯+显示屏信息
分析时间:≤ 2秒
预热时间:≤ 16.5 分钟
误报率:≤ 1%
检出率:≥ 99%
工作环境:-10℃~55℃  相对湿度99%
电源:220V AC 50-60Hz/锂电池供电
电源适配器:输入220V/AC 50-60Hz;输出 16V/DC
电池参数:锂电池组 16.8V/13Ah 连续供电不小于2小时。

应用领域:
1)机场、车站等重要场所的安检;(2)国防安全;(3)公共安全

·上一篇:AD-2015B2台式痕量爆炸物毒品检测..
·下一篇:AD-2012BY手持式危险品液体检测仪
关闭本页】【返回页顶


版权所有 惠州市安全防范行业协会

惠州市安全防范行业协会 主办 备案号:粤ICP备16001904号

地址:惠州市江北云山东路4号(省电信大院5号楼)

办公电话:0752-2811992    邮箱:hzsia2015@163.com


协会介绍 入会指南 协会成员 联系我们
HTTP/1.1 200 OK Date: 1 ?? 2025 06:30:48 G6T Content-Length: 3073 Content-Type: text/html Connection: Close Server: Microsoft-IIS/10.0 Runtime Error

Server Error


Runtime Error

Description: A server error has occurred. The current custom error settings prevent the details of the error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.

Details: To enable the details of this specific error message to be viewable on remote machines, please define an errorDetails attribute within the "filter.config" configuration file. This errorDetails attribute should then have its value set to "On".


<!-- Filter.Config Configuration File -->

<configuration>
    <httpFilters errorDetail="On">
        <!-- managed filters configuration -->
    </httpFilters>
</configuration>

Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "errorPage" attribute of the <httpFilters> configuration tag to point to a custom error page location.


<!-- Filter.Config Configuration File -->

<configuration>
    <httpFilters errorDetail="LocalOnly" errorPage="mycustompage.htm">
        <!-- managed filters configuration -->
    </httpFilters>
</configuration>